Atom Fast Scintillation Crystal 8*8*50 Radiation Detector

New Atom Fast Scintillation Crystal 8*8*50 Radiation Detector

Atom Fast Scintillation 8 * 8 *50 Crystal Radiation Detector Dosimeter / Bluetooth


Atom Fast is one of fastest dosimeters in the world!

the Scintillator for smartphones and tablets, Bluetooth-dosimeter.

The best performance:
Radiation sensor comprises a crystal of Caesium iodide activated by thallium, and solid-state photo-electron multiplier.

Atom Fast with the Scintillator CsI 8*8*50 Crystal Radiation Detector Dosimeter with bluetooth for smartphones and tablets.
The dosimeter contains NO hazardous and NO radioactive materials. Dosimeter dispose is completely safe for humans, animals and the environment!
Weight of the device is not more than 50 g.

Radiation sensor comprises a crystal of 
Caesium iodide activated by thallium, and solid-state photo-electron multiplier.
Atom Fast is one of fastest dosimeters in the world! There are no competitors for this device. 
It provides speedy measurements in approx 25 times quicker then the top-dosimeters based on Geiger Muller SBM20 or others.

Batteries have 150 cycles of charge until the battery is not degraded more than 15%.
Atom Fast dosimeter can work on a single battery charge for 2 months with smartphone or 4 months autonomously with sound and vibration signals. 
This means that the dosimeter can operate continuously 25 or 50 years respectively.

Atom Fast has no equal competitors in scope to refine the measurement result at any point in the range of dose rates available to a reasonable accuracy as long as the required experimental conditions.
Atom Fast device have no equal in speed of reaction to changes in dose rate.

Atom Fast has no equal competitors in terms of user-friendly interface. Atom dosimeter works in conjunction with smartphones and tablets through a special application.

On the Apps screen in excess of digital and visual information to make a rapid assessment of the situation without any special knowledge.
Atom Fast leadership in this area is easy to check in GooglePlay & 
AppStore among similar applications.

You can download the App without purchasing the device & test it in Demo-mode. 
Download Android Atom Swift app or Atom Tag app.
In iOS Atom Radiometer app.

Work size scintillation detector 8 * 8 * 50 * mm.

  • for iOs here dosimeter Atom .
  • for Android - here Atom Tag app
  • here Atom Swift app
  • Atom is an application Next.

Energy range of detected photon radiation, at least 50 - 3000 keV.

The maximum counting speed of at least 10,000 pulses / sec.

Anisotropy of the sensitivity of Cs137 - no more than 30%.

Built-in battery capacity of 280 mAh.

Time from a fully charged battery built on the natural background radiation without using a sound / vibration signal for at least 2 months

The fully charged battery built on the natural background radiation without using wireless communication and sound / vibration alarm for at least 4 months.

complete internal battery charge time from USB-port is not more than 3 hours.

The service life of the internal battery is not less than 150 cycles within the warranty period of the device.

Operating temperature range from -40 to +40 degrees C. When the temperature rises above 40 degrees C the device will alert the user about this dual tone siren sound repeating every ten minutes.

With further increase in temperature the correct operation of the device is not guaranteed.

Overall dimensions 113 * 25 * 14 mm.

Weight of the device is not more than 50 g.


Box contents:

Dosimeter Atom Fast 8x8x50mm

The USB-cable for charging the built-in lithium-ion battery

Carrying case

Dosimeter Atom is designed for the rapid assessment of the radiation situation on the ground, radiation safety control of buildings, premises, vehicles, various objects and materials, detection and localization of sources of ionizing radiation in the home and at work, use in a physical experiment and physical demonstrations, the X-ray radiation, environmental studies.

The dosimeter is a miniature device comprising a detector of ionizing radiation (scintillation detector: cesium iodide crystal size of 4 * 7 * 35 mm, or 8 * 8 * 50 mm with a solid state photomultiplier), email necessary circuitry for its operation, accelerometer radio Bluetooth standard 4.0 and lithium-ion battery. For processing, storage and display of incoming sensor data is used built-in microcomputer, and after data transfer over the radio interface for processing, storage and display information using smart phone or tablet computer running iOS or Android operating system running special applications available for free download in AppStore or Google Play. There are several applications for Atom Fast differ functionally. For Android is Atom Tag applications, Atom Swift, Atom Next. "Dosimeter Atom" for iOS is an application.Capability of the dosimeter with a lot of different applications. For information about applications, refer to corresponding descriptions on additional site.

The dosimeter contains no  hazardous and radioactive materials, and dispose of the dosimeter are safe for humans, animals and the environment.

Communication between the dosimeter and the smart phone or tablet PC is supported via radio Bluetooth 4.0 standard, with the loss of communication device operates autonomously in a customizable thresholds with alarm warning sound and vibration alarm. The data on accumulated over time due to lack of dose stored in the dosimeter and sent to the smartphone or tablet computer at the resumption of communication. In communication with one smartphone or tablet computer can hold a lot of dosimeters Atom.

To recharge the built-in battery monitor using the USB port of any computer or any device with a USB charger connector and the supplied cable. The instrument used modern energy saving technology, but it should be noted that the frequent use of sound, especially a vibration alarm, and low ambient temperatures significantly reduce the duration of continuous operation of the built-in lithium-ion battery. By reducing the built lithium ion battery is below 10% dosimeter will signal this one long and three short beeps, repeated once per minute. In this case, it is recommended built-in lithium-ion battery is fully charged the unit for 3 hours using the USB-cable supplied.

Before working with a dosimeter, make sure there is no damage of the dosimeter housing. The dosimeter is not sealed device does not use the appliance under rain or sleet, if necessary measurements protect the device from ingress of water. If water is spilled on or inside the dosimeter switch off the appliance, allow to dry thoroughly and fully recharge before next use. If necessary, keep liquids radiation inspection device at a distance of 1-2 cm from the liquid surface, if necessary, use a plastic bag to avoid contamination of the surface of the dosimeter.Do not subject the monitor to strong shocks and squeezing. When moving from cold to warm room to measurements do not proceed until the surface of the device is present condensed moisture. When contamination of the dosimeter wipe the unit with a soft dry cloth. Do not use organic solvents to clean the dosimeter: they may damage the housing. Do not try to disassemble and repair the unit, when a fault is detected, contact our service center. Remember that any attempt at repair could void your warranty for the dosimeter.

Operation. Enabling device

To turn on the dosimeter briefly connect it to the charger or USB-port of a PC using the supplied charging cable. A short beep and turn on the dosimeter. Turn on bluetooth settings used for your smartphone or tablet.

Install the application using the links:

or by entering in a string search for "dosimeter atom" in the AppStore and «AtomNext» on Google Play, respectively. Run the application. After a few seconds, the application will detect all are confident in the communication area included dosimeters and give the user the ability to choose which device to operate at the moment. During the linking process dosimeter will emit a double beep, when the loss of connection - single long beep.

Modes of the dosimeter

Your dosimeter with an application on a smartphone / tablet may operate in two basic modes - search and measurement. Operating mode selection is performed from within the application.Consider the operation of the device in each of them.

Search mode

Search mode of the dosimeter is characterized by fast response to changes in the radiation situation, the measurement accuracy is reduced. In the natural background radiation 0.1 mSv / h (10 mR / hr) during a complete changing information does not exceed a few seconds. Work in the search mode is recommended when rapid survey areas, buildings, building materials, vehicles for radioactive contamination. Display search mode is implemented in the form of a graph, histogram, or simulate pointer instrument. Data from the search mode can be used by some applications for replenishment bind files to maps of the area.

Measuring mode

In the measuring mode the dosimeter continuously refines the dose rate by displaying information on the statistical error in the measurement of the current session. A new session can be started at any time by pressing the reset button on the screen, all the information about the previous session will be deleted. The measurement mode suited to the detection of inactive objects by comparing the dose rate in the vicinity of the inspected object with the natural background radiation away from it, as well as the need to obtain high accuracy result. To obtain the correct result will not change the position of the instrument during the measurement session.The margin of error decreases with time square, keep in mind that to achieve twice the precision you need four times more time.

Additional Features

We are constantly working to improve and production applications with additional options, allows you to save on your smartphone / tablet data: archives dose rate radiation activity tag on the area map.

Settings from within the app

The application allows the user to select it convenient for the units, the type and properties of the scale, the threshold is over-power warning dose and the accumulated dose and other parameters. We are constantly working to improve the application and we reserve the right to add features that improve its performance.

The end of work with the application and the end of the dosimeter.

The application after the transfer phone or tablet PC in the standby mode continues to run in the background, supporting communication with the dosimeter and sound and vibration signalling in case of exceeding a predetermined level or dose rate cumulative dose.

If the wireless connection is not needed in order to maintain internal battery charge, turn off the Bluetooth dosimeter gesture on the dosimeter.

To disable a dosimeter on the application and connect other applications use the function RESCAN. The connection with the current device will be discontinued, and after a few seconds the screen will display a list of available communication devices. One device can be in communication simultaneously with more than one smart phone or tablet computer.

After finishing the work, close the application. Before long periods of time the device is recommended to turn off its supply of commands from the application. Keep the monitor in a dry place away from strong heat sources, do not let water get into the unit. Transportation dosimeter in the manufacturer's packaging is possible in any mode of transport without distance limitations.

Responding to the need to turn on and off the device when there is no connection with your smartphone or tablet

If there is no connection with a smartphone or tablet dosimeter operates in the programmed alarm. Thresholds and alarm types are set when there is a link with a smartphone or tablet.

If necessary, turn on or off the device in the absence of a smartphone or tablet, you will need any rod with a diameter of 1.5 to 3 mm, for example a toothpick without tip or rod of a ballpoint pen or a match without sulfur. Slide the rod into the charging jack on the depth of about 20 mm, and press installed in the back of the device panic button. In this case, if the monitor was turned off, it will start immediately, confirming the inclusion of a sound signal. If the device was turned on, it emits three short and one long beep when the button is held. To turn off the device power button must be released during a long beep sound. It is most likely that you'll never need to prolong above operations.  

The manufacturer's warranty

The manufacturer guarantees availability dosimeter within one year from the date of sale when used in accordance with this instruction and no mechanical damage as well as damage caused by water or other liquids into the housing. Warranty and post-warranty repair and replacement of defective dosimeter carries the manufacturer.

Write a review

Note: HTML is not translated!
    Bad           Good

Free UK Shipping

This product qualifies for FREE UK shipping.

Express International Shipping

This product qualifies for Express International Tracked/Signed shipping. Delivery fee applies.


This product qualifies for 1 year manufacturer's warranty.

  • Views: 3192
  • Brand: Atom KBRadar
  • Product Code: Atom Fast Scintillation Crystal Radiation Detector
  • Availability: Pre-order
43 Product(s) Sold
  • £380.00
  • Ex Tax: £316.67

Tags: Atom Fast, Scintillator, Crystal Radiation Detector,

DOSIMETER / RADIATION DETECTOR  ATOM TAG for smartphones and tablets, Bluetooth-dosimeter.&nb..
text_tax £157.50

Atom Swift Scintillation Crystal Radiation Detector DosimeterWE ALWAYS HAVE LATEST VERSION OF SOFTWA..
text_tax £274.17

i4Technology Radiation dosimeter EcoLifePro1Package contents: Radiation dosimeter EcoLifePro 1 ; Eng..
text_tax £104.17

 i4Technology Alcohol Tester AlcoHunter Prof XPackage contents: Alcohol Tester AlcoHunter Prof ..
text_tax £137.50

3M Cable Clips (15 pcs)3M self-adhesive sticky cable clips for all brands dashcams - CAN BE USED FOR..
text_tax £7.92

i4Technology Ultrasonic dog repeller Grad Duos SPackage contents: Ultrasonic dog repeller Grad ..
text_tax £54.17

i4Technology Power supply for Grad repellers 220VPackage contents: Power supply for Grad repell..
text_tax £10.00

text_tax £165.83

text_tax £100.00

Blackvue Front Sticky Pads x2Blackvue 2-channel dashcams front camera 2-sided 3M windscreen mount ta..
text_tax £6.67

Blackvue 3M Cable Sticker Clips (10 pcs sold together)Organize and mount your cables with these basi..
text_tax £5.42

text_tax £165.83